 |  | 
  
2-in-1 4-port
PCMCIA CardBus Card
( 2x USB 2.0 + 2x
Firewire)
This super combination CardBus adapter features two high-speed connectivity
technologies, USB 2.0 and IEEE 1394 (FireWire) connections, on a single PCMCIA
card. It saves you money and take up only one card slot on your notebook
PC.
With this card added into your older laptop PCs,
It includes 2 of the USB 2.0 ports and two of the IEEE 1394 Firewire external
ports, which instantly provides better performance on the speed connection and
data transfer for printer, scanner, PC camera, storage, and Broadband network
connections. Allows you to take full advantage of the USB 2.0 and Firewire
technology on your current systems.
This card can also automatically switches to the
highest speed if supported by the peripherals connected ! Users can take
advantage of the scalability that USB 2.0 products and DV Firewire 1394 products
provide.
Hot Pluggable - you may connect any USB or Firewire devices without restarting
the computer.
Supports all Windows-based
laptop PCs. Use
this USB 2.0 + Firewire IEEE 1394 PCMCIA combo adapter card to upgrade or expand the ports in your laptop
PC or
replace/expand your existing USB 2.0 ports/Firewire ports if they are bad !
Optional
power adapter cable is included for connection with high current consumption
devices like external USB DVD burner, exteranl USB/Firewire hard drive !
 |
Why
the power adapter is needed for some USB 2.0 or Firewire devices ? |
| Answer:
Use of the power
adapter is optional. However it can ensure users that the maximum full
500mA bus power is available to those high
power bus-powered USB/Firewire DV devices. Cards that do not
include a power adapter are not able to provide a full 500mA of power on
each port. So you may have trouble using those high USB/Firewire
bus-powered devices like external USB storage, scanners, CD-RW
drives, hard drives, Zip drives, PDAs due to insufficient bus power
provided from the ports connected. |
 |
|

Features
for USB 2.0
- Supports Windows 98SE/ME/2000/XP/Vista.
- Dual hi-speed USB 2.0 ports (32-Bit CardBus).
- Supports Plug & Play
and Hot-Swapping of all USB 1.1/2.0 devices.
- Supports High-Speed (480Mbps),
Full-Speed (12Mbps) and Low-Speed (1.5Mbps).
- Fully backwards compatible with USB 1.1
devices.
- Auto detect speeds and connections of
USB devices.
- Guarantees full
5V/500mA Bus Power
to be shared by any 2 USB devices.
- Optional power
adapter cable is included to ensure full bus power for
operations with high-powered USB devices such as USB storage,
scanners, CD-RW drives, hard drives, Zip drives
- Current Protection Active lf Bus Power
Over 500mA.
- USB connection support for up to 128
devices in peer-to-peer connection.
- No additional dongle or cables needed.
Compact design, perfect for the mobile professionals.
|
Features
for Firewire
|
 
- 32-bit CardBus PC Card Type II standard
compliant
- Supports device hot swap and wake-up
USB 2.0 Interface
- 2 of the USB type A connectors.
- USB 2.0 specification compliant.
- Open Host Controller Interface specification
for USB Rev 1.0a compliant.
- Enhanced Host Controller Interface
specification for USB Rev. 0.95 compliant.
- Hi speed data transfer rate: High speed at 480Mbps,
Full speed at 12Mbps & Low speed at 1.5Mbps.
- External 5V DC jack for high current
consumption devices.
Firewire 1394A Interface
- 1 of the 6-pin 1394a port plus 1 of the 4-pin
mini 1394a port.
- IEEE 1394 Standard compliant for high
performance serial bus and P1394A Supplement 4.0.
- 1394 OpenHCI specification V1.0 and V1.1
compliant.
- Various data transfer mode at 100/200/400 Mbps.
System Requirements
- Windows 98SE/ME/2000/XP/Vista
- 300 Mhz or faster CPU speed
- One available PCMCIA CardBus slot
- 2-in-1
PCMCIA CardBus combo card
- Installation
sheet
- Driver CD disk
- USB power wire
- 4-pin to 6-pin Firewire Cable
|
|