3-Channel HD SD Camera Extender Kit For Installing 3 Cameras Or Adding 2 New Cameras Max Transmission 650 FT
This 3-channel analog camera video extender kit is specially designed to transmit 3 of AHD HD type surveillance camera or mixed with analog camera or video signals over existing or single new coaxial cable.
The maximum transmission distance can be up to 200 meters or 650 feet with excellent video quality with good isolation for avoiding interference from other devices.
It is a long distance video transmission unit for sending camera feeds over single RG-11, RG-59, RG-6 type BNC or RF coaxial cable.
This 3-channel video extender kit helps
installers save much cost of cable, labor and time.
Easy expanding of your CCTV surveillance setup. Using this 3-video extender for
adding 2 new HD or SD cameras with the existing camera combined together and sent over the existing BNC
or coaxial cable.
Users can adjust the brightness level of the video images as needed based upon the transmission distance for optimal picture quality.
 |
 |
Easy Setup
The transmitter combines 3 video signals into one and sends
them over the existing BNC or RF coax cable in real time to reach the receiver
end.
Then the receiver reconstructs the combined camera or video signals back to 3 individual video signals at the remote end for hookup with DVR or surveillance monitor or video multiplexer.
 |
 |
 |
 |
 |
Easy And Low-Cost Solution For Adding New Video/Camera
Users can still use the existing BNC or RF coax cable to transmit both old camera and new camera at the same time.
Save labor time and reduce the cost of buying and installing more cables.
 |
Long Range
Transmission
The maximum video signal transmission distance can be up to 200 meters or
650 feet with excellent video quality with good isolation for avoiding
interference from other devices.
 |
Adjustable Brightness Control
The transmitter unit has 2 video brightness adjustment dial for 2 video input
channels.
Users can adjust the brightness level of the video images as needed based upon the transmission distance for optimal video performance.
 |
- A standalone camera video extender for sending 3 HD camera video signals or combination of HD and analog camera signal over single coaxial cable.
- Maximum transmission distance up to 200 meters or 650 feet with excellent video quality with good isolation for avoiding interference from other devices.
- Work with any RG-11, RG-59, RG-6 type BNC or RF coaxial cable.
- Easy CCTV setup expansion for adding 2 new HD or SD cameras along with the existing camera combined together and sent over the existing BNC or coaxial cable.
- Save money, cables and labor time by expanding the existing setup with 2 extra camera or 2 new video feeds added. No new video cable installation needed
- 2 brightness adjustment rotary dial built on the transmitter for video brightness adjustment for 2 camera channels.
- Users can adjust the brightness level of the video images as needed based upon the transmission distance for optimal video performance.
- Supports DC power input from 9V to 12V.
- Video Inputs: AHD Type or Analog BNC Type
- Transmitter Unit: 3 BNC video inputs + 1 BNC video output
- Receiver Unit: 1 BNC video input + 3 BNC video outputs
- Power Consumption: 3W for transmitter/receiver
- Power Requirement: DC9~12V / 200mA
- Dimension: 170mm x 112mm x 32mm (6.7" x 4.4" x 1.3")
- Operating Temperature Range: -10 to 60 degree C
- Transmitter unit
- Receiver unit
- DC power adapter x 2
- User manual